Follow me on

icon facebook Facebook
icon twitter Twitter

 

fiu logo

arc logo

LIST OF PUBLICATIONS

THESIS

  1. “Simulation of Flash Smelting Phenomena in a Laboratory Reactor”, Eng.Sc.D. Thesis, Columbia University, Henry Krumb School of Mines, New York, June 1987.
  2.  “Hydrothermal Treatment of Nickeliferous Laterite with Ferric Chloride Solutions”, M.S. Thesis, University of British Columbia, Department of Metallurgy, Vancouver, British Columbia, Canada, May 1982.
  3.  “The Manufacture of a Variety of Grogs from Guyana Aluminosilicates”, M.Phil. Thesis, Mineral Engineering Department, Leeds, United Kingdom, July 1977

 

SUBMITTED ABSTRACTS

  1. P. K. S. Gill, N. Munroe, V. Tek, D. Prasad, W. Haider, S. Pandya, C. Pulletikurthi, Corrosion resistance of Ti based CNT Metal Matrix Composites in biological media. MS&T, October 17-21, 2010, Houston, Texas.
  2. N. Munroe, P. K. S. Gill, V. Tek, C. Pulletikurthi, S. Pandya, and W. Haider, “Electrochemical and biocompatibility behavior of CNT Metal Matrix Composites”. MS&T, October 17-21, 2010, Houston, Texas.
  3. S. Pandya, N. Munroe, W. Haider, P. K. S. Gill, C. Pulletikurthi and D. Prasad, The Role of Micro Structural Phases on the Biocompatibility of Surface Treated Nitinol Alloys. MS&T, October 17- 21, 2010, Houston, Texas.
  4. D. Persaud, N. Munroe, W. Haider, S. Pandya, P.S. Gill, and C. Pulletikurthi, Assessing the Effect of Surface Roughness on Corrosion Resistance of Ternary Nitinol Alloys. MS&T, October 17-21, 2010, Houston, Texas.

 

PUBLISHED ABSTRACTS

1.            W. Haider, N. D. Munroe, C. Pulletikurthi, P. K. S. Gill, Corrosion behavior of electropolished and non-electropolished ternary Nitinol alloys, International Journal of Medical Implants and Devices, Vol 4, No 1, pp 9, 2009.
2.            C. Pulletikurthi, N. D. Munroe, W. Haider, P. K. S. Gill. Osteoblast cell growth on surface treated porous Nitinol, International Journal of Medical Implants and Devices, Vol 4, No 1, pp 47, 2009.

REFEREED PUBLICATIONS

  1. P. K. S. Gill, N. Munroe, W. Haider, C. Pulletikurthi, “Investigating Carbon Nanotubes in Copper-Chromium Based Metal Matrix Composite”, submitted to the Journal of Materials Science.
  2. W. Haider, N. Munroe, V. Tek, C. Pulletikurthi, Puneet K. S Gill, S. Pandya, “Review on Surface Modifications of Nitinol”, Journal of Long Term Effects of Medical Implants (Accepted).
  3. W. Haider, N. D. Munroe, C. Pulletikurthi, Puneet K. S Gill, S. Amruthaluri, “A Comparative Biocompatibility Analysis of Ternary Nitinol Alloys” Journal of Materials Engineering and Performance, (2009) DOI: 10.1007/s11665-009-9435-5.
  4. N. D. Munroe, C. Pulletikurthi, W. Haider,“Enhanced Biocompatibility of Porous Nitinol” Journal of Materials Engineering and Performance, (2009) DOI: 10.1007/s11665-009-9454-2.
  5. Y. Gao, N. Munroe, X. Kong; K. Jones, “Assessing the catalyst processing for low temperature cofired ceramic (LTCC) based Direct Methanol Fuel Cells (DMFCs)” Journal of Power Sources, 189 (2009), pp. 935-942
  6. D. Cheddie and N. Munroe, “Semi-Analytical PEM Fuel Cell Modeling”, Journal of Power Sources 183 (2008) 164-173. 7.    W. K. Jones, N. Savaram and N. Munroe, “A Direct Methanol Fuel Cell Using Cermet Electrodes in Low Temperature Cofire Ceramics “(LTCC) Book Chapter in Fuel Cell Electronics Packaging, Springer, Editors, K. Kuang, K. Easler, 2007.
  7. D. Cheddie, N. Munroe, “A dynamic 1D model of a SOFC for real time simulation”, J. Power Sources 171 (2007) 634-643.
  8. D. Cheddie, N. Munroe, “A two phase model of an intermediate temperature PEM fuel cell”, Int. J. Hydrogen Energy 32 (2007) 832-841.
  9. D. Cheddie, N. Munroe, “Analytical Correlations for Intermediate Temperature PEMFCs”, J. Power Sources 160 (2006) 299-304.
  10. D. Cheddie, N. Munroe, “Three-dimensional Modeling of High Temperature PEMFCs”, J. Power Sources 160 (2006) 215-223.
  11. D. Cheddie, N. Munroe, “Two-dimensional Effects in Intermediate Temperature PEMFCs”, Int. J. Transport Phenomena 8 (2006) 51-68.
  12. D. Cheddie, N. Munroe, “Parametric Model of an Intermediate Temperature PEMFC”, J. Power Sources 156 (2006) 414-423.
  13. D. Cheddie, N. Munroe, “Mathematical Model of a PEMFC using a PBI Membrane”, Energy Conversion and Management 47 (2006) 1490-1504.
  14. D. Cheddie, N. Munroe, “Review and Comparison of Approaches to Proton Exchange Membrane Fuel Cell Modeling”, J. Power Sources 147 (2005) 72-84.
  15. T. Laha, K. Balani, , A. Agarwal, J. Karthikeyan and N. Munroe, "Effect of Carrier Gases on Microstructural and Electrochemical Behavior of Cold-Sprayed 1100 Aluminum Coating" Surface and Coatings Technology, 195, (2005) 272-279.
  16. S. Kanchibbolta and N.D.H. Munroe, “Amorphization in Ni-Ti-Ta system through mechanical Alloying", Journal of Materials Science, 40 (2005) 5003-5006.
  17. C.V. Kropas-Hughes, J.L. Blackshire, R.N. Singh, I.N. Tansel and N. Munroe, “Detection of Hidden Corrosion with X-rays” 5th International Aircraft Corrosion Workshop Sponsored by the Naval Air Systems Command and the Office of Naval Research, Solomons, Maryland, 22-25, 2002.
  18.  Tan, H. Gu, C. Laird and N.D.H. Munroe, “Cyclic Deformation Behavior of High Purity Titanium Single Crystals Part I”, Metall. Mater. Trans.,A Vol. 29A, February 1998.
  19.  Tan, N.D.H. Munroe, Z. Fathi and R. Garard, “Firing of Bauxite Extrudates in a Variable Frequency Microwave Furnace”, J. Microwave Power and Electromagnetic Energy, Vol. 33 No. 1,1998.
  20. Tan, H. Gu, C. Laird and N.D.H. Munroe, “Cyclic Deformation Behavior of High Purity Titanium Single Crystals*II. Microstructure and Mechanism”, Metall. Mater. Trans.,A Vol. 29A, February 1998.
  21. N.D.H. Munroe, X. Tan, and H. Gu, “Orientation Dependence of Slip and Twinning in HCP Metals”,Scripta Materialia, Vol. 36, No. 12, 1383-1386, 1997.
  22. N.D.H. Munroe, "The Leaching of Nickeliferous Laterite with Ferric Chloride", Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 28 (6), 995-1000 December, 1997.
  23. T. Baker, V.A. Tsihrintzis, N. Munroe and L. Ruiz, “Implementing a Teaching Incentive Program”, NEA Higher Education Journ. Thought & Action, 23-28, 1995.
  24. N.D.H. Munroe, "Aluminosilicate Refractory Grogs", Proceedings of the International Congress on Metallurgy and Materials Technology, Vol. 9, pp. 427 – 438, 1994.
  25. M.Z.C. Hu, R.E. Ihli, G.F. Bloomingburg, J.M. Norman, N.D.H. Munroe, R. Williams and B.D. Faison, "Biosorption and Biotransformation of Uranium by Pseudomonas Aeruginosa CSU" Annual Meeting, Society of Industrial Microbiology, Boston, MA, July 30 - August 4, 1994.
  26. Z.F. Dong, M.A. Ebadian, and N.D.H. Munroe, "The Effect of Surface Tension on Double Diffusive Convection in a Trapezoidal Enclosure" 1993 ASME Winter Annual Meeting, New Orleans.
  27. N.D.H. Munroe, "Numerical and Experimental Simulation of Particulate Flash Reaction Systems" in Heat Transfer in Fire and Combustion Systems - 1993, ASME, HTD - Vol. 250.
  28. N.D.H. Munroe and N.J. Themelis, "Rate Phenomena in a Laboratory Flash Smelting Reactor" Proceedings of the Copper 91 International Symposium, Vol. IV, Pergamon Press, New York, pp. 475 - 494, 1991.
  29. S. Brandom, R.D. Hagni, and N.D.H. Munroe, "Reflected Light Microscopy and Electron Microprobe Analysis of Feeds and Products of Laboratory Flash Smelting" Process Mineralogy VI, SME-AIME Annual Meeting, 1985.

 

CONFERENCE PROCEEDINGS
  1. W. Haider, N. Munroe, V. Tek, A. J. McGoron, P. K. S. Gill, C. Pulletikurthi, S. Pandya, “An Assessment of Metal Ions Release from Ternary Nitinol Alloys under Static and Dynamic Conditions”, SMST 2010 The International Conference for Shape Memory and Superelastic Technologies, May 16-20, 2010, Pacific Grove, California (Submitted)
  2. W. Haider, N. Munroe, V. Tek, A. J. McGoron, P. K. S. Gill, C. Pulletikurthi, S. Pandya, “Influence of Surface Treatments on Corrosion Resistance and Metal Ion Leaching”, SMST 2010 The International Conference for Shape Memory and Superelastic Technologies, May 16-20, 2010, Pacific Grove, California (Submitted)
  3. P. K. S. Gill, N. Munroe, C. Pulletikurthi, S. Pandya, V. Tek, W. Haider, “In-Vitro Localized Corrosion Studies of Ti-Ta Alloy”, SMST 2010 The International Conference for Shape Memory and Superelastic Technologies, May 16-20, 2010, Pacific Grove, California (Submitted)
  4. C. Pulletikurthi, N. Munroe, V. Tek, P. K. S. Gill, S. Pandya, W. Haider, “Assessing the Cytotoxicty of Ni from Porous Nitinol (PNT) on osteoblast cells”, SMST 2010 The International Conference for Shape Memory and Superelastic Technologies, May 16-20, 2010, Pacific Grove, California (Submitted).
  5. S. Akar, V. Tek, A. Bange, L. Lagos, P.K. Gill, N. Munroe and T.G. Thundat, “Development of a Biosensor for Detection of Phosphate Species in Uranium Contaminated Ground Water and Wastewater Sediments”, WM2010 Conference, March 7-11, 2010, Phoenix, AZ.
  6. W. Haider, N. Munroe, P. K. S. Gill, C. Pulletikurthi, “ The Electrochemical Characteristics of Surface Treated Nitinol Alloys”, NACE-Corrosion 2010 conference, Research in Progress Symposium, pp. 52-54, March 14-18, 2010 San Antonio, Texas.
  7. W. Haider, N. D. Munroe, C. Pulletikurthi, P. K. S. Gill, “Corrosion Behavior of Electropolished and Non-electropolished Ternary Nitinol Alloys”, 25th Southern Biomedical Engineering Conference 2009, The International Federation for Medical and Biological Engineering (IFMBE) Proceedings 24, pp. 33-34, 2009.
  8. N. Munroe, G. Philippidis, P. K. S. Gill, W. Haider, S. Amruthaluri, C. Pulletikurthi, S. Pandya, “Submerged Jet Mixing of Non-newtonian Fluids in Waste Tanks”, ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE) Proceedings, Lake Buena Vista, Florida. IMECE2009‑10379.
  9. W. Haider, N. Munroe, S. Shah, A. J. McGoron, C. Pulletikurthi, P. K. S. Gill, “Cytotoxicity Assessment of Corrosion Products of Nitinol alloys”, Materials and Processes for medical devices-Conference and Exhibition, August 10-12, 2009, Minneapolis, Minnesota. (In Press)
  10. N. Munroe, S. Amruthaluri, Puneet K.S Gill, W. Haider, “Effect of Addition of Ni and Ag on Cu-CNT Composites Electrical Conductivity”. Materials Science & Technology (MS&T) 2008 Conference, pp. 2298-2308, October 5-9, 2008, Pittsburgh, Pennsylvania, USA
  11. N. Munroe, Puneet K.S Gill, S. Amruthaluri, W. Haider, “Highly Conductive Nanostructure Cu-Cr-MWCNT Composite”. Materials Science & Technology (MS&T) 2008 Conference, pp. 2309-2318, October 5-9, 2008, Pittsburgh, Pennsylvania, USA.
  12. N. Munroe, W. Haider, A. Datye,  K. H. Wu “Corrosion Behavior of Electropolished Implant Alloys”. Proceedings, SMST 2007, The International Conference for Shape Memory and Superelastic Technologies, pp. 307-314, December 3-5, 2007, Tsukuba, Japan.
  13. N. Munroe, W. Haider, K. H. Wu, A. Datye, “Corrosion Behavior of Cardiovascular Stent Materials”. Proceedings, SMST 2007, The International Conference for Shape Memory and Superelastic Technologies, pp. 299-306, December 3-5, 2007, Tsukuba, Japan.
  14. M. Dass, N. Munroe, R. Srivastas, D. Roelant, “Flow Assurance in Gas-Oil Pipelines” LACCEI Conference, Mayaguez, Puerto Rico, June 21-23, 2006.
  15. M. Daas, R. Srivastava, N. Munroe, D. Roelant, “Designing and Operating Reliable Gasifiers”, LACCEI Conference, Mayaguez, Puerto Rico, June 21-23, 2006.
  16. S. Kanchibbolta, N. Munroe and T. Kartikeyan, “Manufacture of NiTi-Ta Alloys Through Conventional Powder Metallurgy for Medical Devices”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  17. D. Cheddie, N. Munroe, “Perspectives on Fuelling Fuel Cells for Energy Systems in Developing Countries”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  18. T. Kartikeyan, N. Munroe and S. Kanchibbolta, “Dielectric Properties of Refractory Composites using Cavity Perturbation Technique at selected Microwave Frequencies”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  19. N. Munroe and S. Kanchibbolta, “Production of Radiopassive Shape-Memory Alloys For Medical Devices”, Inaugural Conference of the Florida Research Consortium & The Tampa Bay Technology Forum, St. Petersburg, Florida, May 17 & 18, 2004.
  20. N. Munroe, G. Nurse, S. Gallocher, G. Gonzalez, “Biocompatibility of Ni-Ti Shape Memory Alloys in Vitro”, Proceedings for Materials & Processes for Medical Devices Conference, Anaheim, California, Sept. 8-10, 2003.
  21. N. Munroe, G. Nurse, S. Gallocher and G. Gonzalez, “Repassivation Potential of Radiologically Doped Shape Memory Alloys in Vitro”, Proceedings for Materials & Processes for Medical Devices Conference, Anaheim, California, Sept. 8-10, 2003.
  22. N. Munroe, “Electrochemical Reactions associated with the Floatability of Venezuelan Auriferous Pyrite from the Processes of Cyanidation”, presented at the 5th Biennial National Conference on Mining & Quarrying, Guyana, South America, August 21-22, 2003.
  23. S. Kanchibbolta, N. Munroe and T. Kartikeyan, “Synthesis and study of NiTi-Ta Alloys by Mechanical Alloying”, TMS 2003 132nd Annual Meeting & Exhibition, San Diego, CA, March 2-6, 2003.
  24. T. Kartikeyan, N. Munroe and S. Kanchibbolta, “Measurement of Dielectric Properties of Refractory Materials and Powdered Metals”, SMEC Conference, Miami, Florida, March 24-27, 2003.
  25. S. Kanchibbolta, N. Munroe, Y. Liu and T. Kartikeyan, “Microstructure and Phase Transformation of NiTi-Ta Shape Memory Alloys using Mechanical Alloying”, SMEC Conference, Miami, FL, March 24-27, 2003.
  26. N.D.H. Munroe, “Microstructures of Bauxite Extrudates Fired at 1450 oC and 1550 oC”,Proceedings of the Second National Conference on Mining and Quarrying, August 29-30, 1996.
  27. N.D.H. Munroe, “Refractory Grogs for the Monolithic Industry Using Guyana Aluminosilicates”, Proceedings of the Second National Conference on Mining and Quarrying, August 29-30, 1996.
  28. N.D.H. Munroe and R. Tilleux, "Rate Enhancement of Photocatalytic Cyanide Oxidation by Application of Anodic Bias/Coupled Semi-Conductor Configuration", Proceedings of the Spectrum '96 International Topical Meeting on Nuclear and Hazardous Waste Management, August 18-23, 1996.
  29. N.D.H. Munroe and G. Hoo, "Electrokinetic Decontamination of Concrete and Porous Media", Spectrum '96 Nuclear and Hazardous Waste Management International Meeting, Seattle, Washington, August 18-23, 1996.
  30. N.D.H. Munroe, "Aluminosilicate Refractory Grogs", Proceedings of the International Congress on Metallurgy and Materials Technology, 1994, Vol. 9, pp. 427 - 438.
  31. N.D.H. Munroe, "A Mechanistic Study of the Biosorption of Uranium by Pseudomonas Aeruginosa”, Proceedings of the 4th Annual WERC Technology Development Conference, April, 1994.
  32. N.D.H. Munroe, J. D. Bonner, R. Williams, K. E. Pattison, J. M. Norman, and B. D. Faison, "A Binding of Dissolved Uranium by Pseudomonas Aeruginosa CSU", 15th Symposium on Biotechnology for Fuels and Chemicals, May 10-14, 1993, Colorado Springs, Colorado.N.D.H. Munroe, "Uranyl Ion Interaction with Membranes of Pseudomonas Aeruginosa", Proceedings of the 3rd Annual WERC Technology Development Conference, April, 1993.

 

INVITED CONFERENCE PRESENTATIONS
  1. N. Munroe, “Greenhouse Gas Accounting”, Commonwealth Training Program on Public Policy and Management, Feb 8-9, 2010, Barbados.
  2. N. Munroe, “Micro-Intermediate-High Temperature Fuel Cell Development”, The FIU First Energy Workshop, March 12, 2010.
  3. N. Munroe, “Greenhouse Gases and the South Florida Environment”, Environmental Science Symposium on Top Environmental Issues Affecting South Florida, MDC, March 1, 2010.
  4. N. Munroe, “Multi-Disciplinary, Collaborative Research with the Applied Research Center (ARC), Florida International University”, 10th Annual STTR/SBIR and HBCU/MI Small Business Technical Conference, Huntsville, Alabama, January 25-28, 2010.
  5. N. Munroe, “Biodiesel Demonstration/Validation Project –Western Hemisphere Information Exchange 07, Alternative Fuels and Unmanned Systems Conference, Ciudad Del Saber, Panama, Dec 9-11, 2009.
  6. N. Munroe, S. Amruthaluri, Puneet K.S Gill, W. Haider, “Synthesis of highly     conductive Cu-MWCNT composite”, Materials Science & Technology 2008 Conference and Exhibition, October 5-9, 2008, Pittsburgh, PA.
  7. N. Munroe, Puneet K.S Gill, S. Amruthaluri, W. Haider, “Highly conductive nanostructure Cu-Cr-MWCNT composite”, Materials Science & Technology 2008 Conference and Exhibition, October 5-9, 2008, Pittsburgh, PA.

 

CONFERENCE PRESENTATIONS
  1. W. Haider, N. Munroe, P. K. S. Gill, C. Pulletikurthi, “ The Electrochemical Characteristics of Surface Treated Nitinol Alloys”, NACE-Corrosion 2010 conference, Research in Progress Symposium, March 14-18, 2010 San Antonio, Texas
  2. P. K. S. Gill, N. Munroe, W. Haider, C. Pulletikurthi, S. Pandya, V. Tek, Biocompatibility Assessment of a Conductive Ni-Ti-CNT Composite, MRS Fall Meeting, November 30 - December 4, 2009, Boston, Massachusetts.
  3. C. Pulletikurthi, N. Munroe, W. Haider, P. K. S. Gill, S. Pandya, V. Tek, Localized Corrosion of Surface Treated Porous Nitinol in Different Corrosion Liquid Media, MRS Fall Meeting, November 30 - December 4, 2009, Boston, Massachusetts.
  4. N. Munroe, G. Philippidis, P. K. S. Gill, W. Haider, S. Amruthaluri, Submerged Jet Mixing of Non-Newtonian Fluids in Waste Tanks, ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE), November 13-19, 2009, Lake Buena Vista, Florida.
  5. W. Haider, N. Munroe, V. Tek, Y. Tang, A. J. McGoron C. Pulletikurthi, P. K. Singh Gill, S. Pandya, Comparing the Biocompatibility of Electropolished and Magnetoelectropolished Nitinol, Biointerface, October 26-28, 2009, San Mateo, California.
  6. C. Pulletikurthi, N. Munroe, W. Haider, V. Tek, P. K. S Gill and S. Pandya, The Effect of Electropolishing and Magnetoelectropolishing on the Biocompatibility of Porous Nitinol Implant, Biointerface, October 26-28, 2009, San Mateo, California.
  7. P. K. S. Gill, N. Munroe, C. Pulletikurthi, W. Haider, Assessing Electrical Conductivity and Localized Corrosion of MWCNT Based Metal Matrix Composite, Nanotech India 2009, 14-16 August, 2009, Kochi, India.
  8. W. Haider, N. Munroe, S. Shah, A. J. McGoron, C. Pulletikurthi, P. K. S. Gill, Cytotoxicity Assessment of Corrosion Products of Nitinol Alloys, Materials and Processes for medical devices-Conference and Exhibition, August 10-12, 2009, Minneapolis, Minnesota.
  9. W. Haider, N. Munroe, Y. Tang, A. J. McGoron, C. Pulletikurthi, P. K. S. Gill, Endothelialization of Ternary Nitinol Alloys, Materials and Processes for medical devices-Conference and Exhibition, August 10-12, 2009, Minneapolis, Minnesota.
  10. C. Pulletikurthi, N. Munroe, S. Shah, A. J. McGoron, W. Haider and P. K. S. Gill, Effect of Surface Treatments on the Cytotoxicity of Porous Nitinol, Materials and Processes for Medical Devices-Conference and Exhibition, Aug 10-12, 2009, Minneapolis, Minnesota.
  11. W. Haider, N. D. Munroe, C. Pulletikurthi, P. K. S. Gill, Corrosion Behavior of Electropolished and Non-electropolished Ternary Nitinol Alloys, 25th Southern Biomedical Engineering Conference, May 15-17, 2009, Miami, Florida.
  12. C. Pulletikurthi, N. D. Munroe, W. Haider, P. K. S. Gill, Osteoblast cell growth on surface treated porous Nitinol, 25th Southern Biomedical Engineering Conference, May 15-17, 2009, Miami, Florida.
  13. P. K. Gill, N. Munroe, S. Amruthaluri, C. Pulletikurthi, W. Haider, The Biocompatibility Studies for MWCNT Based Metal Matrix Composite for Application in Bio-Fuel Cells, Portable Energy, May 6, 2009, Orlando, Florida.
  14. W. Haider, N. Munroe, C. Pulletikurthi, P. K. S. Gill, S. Amruthaluri, Corrosion and Biocompatibility of Ternary Nitinol Alloys, ASEAN Pakistan Conference on Materials Science, December 15-16, 2008, Islamabad, Pakistan.
  15. N. Munroe, S. Amruthaluri, Puneet K.S Gill, W. Haider, “Effect of Addition of Ni and Ag on Cu-CNT Composites Electrical Conductivity”. Materials Science & Technology (MS&T) 2008 Conference, October 5-9, 2008, Pittsburgh, Pennsylvania.
  16. N. Munroe, Puneet K.S Gill, S. Amruthaluri, W. Haider, “Highly Conductive Nanostructure Cu-Cr-MWCNT Composite”. Materials Science & Technology (MS&T) 2008 Conference, October 5-9, 2008, Pittsburgh, Pennsylvania.
  17. N. D. Munroe, W. Haider, C. Pulletikurthi, Puneet K.S Gill, S. Amruthaluri, S. Kanchibhotla, Phase Transformation and Energy Absorption of Nitinol Alloys, Proceedings, SMST 2008, The International Conference for Shape Memory and Superelastic Technologies, September 21-25, 2008, Stresa, Italy.
  18. W. Haider, N. D. Munroe, C. Pulletikurthi, Puneet K. S Gill, S. Amruthaluri, A Comparative Biocompatibility Analysis of Ternary Nitinol Alloys, SMST 2008, The International Conference for Shape Memory and Superelastic Technologies, September 21-25, 2008, Stresa, Italy.
  19. N. D. Munroe, C. Pulletikurthi, W. Haider, Enhanced Biocompatibility of Porous Nitinol. SMST 2008, The International Conference for Shape Memory and Superelastic Technologies, September 21-25, 2008, Stresa, Italy.
  20. W. Haider, Puneet K.S Gill, N. Munroe, S. Amruthaluri, Microstructural Analysis of Cu-Cr-MWCNT Composite, 19th AeroMat Conference and Exposition, June 23-26, 2008, Austin, Texas.
  21. S. Amruthaluri, N. Munroe, Puneet. K.S Gill, W. Haider, Effect of addition of Ni and Ag on Cu-CNT Composite's Electrical Conductivity, 19th AeroMat Conference and Exposition, June 23-26, 2008, Austin, Texas.
  22. N. Munroe, W. Haider, A. Datye,  K. H. Wu “Corrosion Behavior of Electropolished Implant Alloys”. Proceedings, SMST 2007, The International Conference for Shape Memory and Superelastic Technologies, December 3-5, 2007, Tsukuba, Japan.
  23. N. Munroe, W. Haider, K. H. Wu, A. Datye, “Corrosion Behavior of Cardiovascular Stent Materials”. Proceedings, SMST 2007, The International Conference for Shape Memory and Superelastic Technologies, December 3-5, 2007, Tsukuba, Japan.
  24. N. Munroe, Puneet K.S Gill, “Deepwater resource exploitation – A new frontier for hydrocarbon supply”, The Sixth Latin American and Caribbean Conference for Engineering and Technology - LACCEI 2008 "Partnering to success: Engineering, Education, Research and Development" Tegucigalpa, Honduras, June 4 - 6, 2008.
  25. Norman D. H. Munroe, Denver F. Cheddie, William Mendez, “Mathematical model of fluid injection in heavy oil reservoirs”, The Sixth Latin American and Caribbean Conference for Engineering and Technology - LACCEI 2008 "Partnering to success: Engineering, Education, Research and Development" Tegucigalpa, Honduras, June 4 - 6, 2008.
  26. N. Munroe, A. Dayte, K. Wu and W. Haider, “Corrosion behavior of cardiovascular stent materials” International Conference on Shape Memory and Superelastic Technologies, December 3-5, 2007, Tsukuba, Japan.
  27. N. Munroe, K. Wu, A. Dayte, and W. Haider, “Corrosion behavior of electropolished implant alloys”, International Conference on Shape Memory and Superelastic Technologies, December 3-5, 2007, Tsukuba, Japan.
  28. D. Cheddie, N. Munroe, “Development of real time simulation models of SOFCs for use in HIL systems”, LACCEI 2006 Proceedings, Mexico City, Mexico.
  29. D. Cheddie, N. Munroe, “Two Phase Modeling of a Phosphoric Acid Doped PEM      Fuel Cell”, ASME Joint U.S.-European Fluids Engineering Summer Meeting 2006, Miami, FL.
  30. D. Cheddie, N. Munroe, “Modeling of PEM Fuel Cells using PBI Membranes”, ASME    Fuel Cell Conference 2006, Irvine, CA.
  31. D. Cheddie, N. Munroe, “Mathematical Modeling of High Temperature PEM Fuel Cells”, Materials Congress 2006, London, UK.
  32. M. Dass, N. Munroe, R. Srivastas, D. Roelant, “Flow Assurance in Gas-Oil Pipelines” LACCEI Conference, Mayaguez, Puerto Rico, June 21-23, 2006.
  33. N. Munroe, “Energy and Economic Development in the Caribbean”, panel presentation, LACCEI Conference, Mayaguez, Puerto Rico, June 21-23, 2006.
  34. M. Daas, R. Srivastava, N. Munroe, D. Roelant, “Designing and Operating Reliable Gasifiers”, LACCEI Conference, Mayaguez, Puerto Rico, June 21-23, 2006.
  35. D. Cheddie, N. Munroe, “Strategies for Developing Nations in the Future Hydrogen Economy”, Caribbean Studies Newsletter 32 (2005) 2-5.
  36. D. Cheddie, N. Munroe, Modeling of High Temperature PEM Fuel Cells using FEMLAB, Comsol Multiphysics Conference 2005, Boston, MA.
  37. N. Munroe and D. Cheddie, “Fuelling Fuel Cells from Domestic Resources in Developing Countries”, LACCEI Conference, Cartegena, Colombia, June 6-10, 2005.
  38. S. Kanchibbolta, N. Munroe and T. Kartikeyan, “Manufacture of NiTi-Ta Alloys Through Conventional Powder Metallurgy for Medical Devices”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  39. D. Cheddie, N. Munroe, “Perspectives on Fuelling Fuel Cells for Energy Systems in Developing Countries”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  40. T. Kartikeyan, N. Munroe and S. Kanchibbolta, “Dielectric Properties of Refractory Composites using Cavity Perturbation Technique at selected Microwave Frequencies”, LACCEI Conference, Miami, Florida, June 2-4, 2004.
  41. 41. N. Munroe and S. Kanchibbolta, “Production of Radiopassive Shape-Memory Alloys For Medical Devices”, Inaugural Conference of the Florida Research Consortium & The Tampa Bay Technology Forum, St. Petersburg, Florida, May 17 & 18, 2004.
  42. T. Laha, G. Gonzalez, A. Agarwal and N. Munroe, "Microstructural and Electrochemical Characterization of Aluminum based Nanostructured Composite Coating" ASM International Surface Engineering Congress, Sept. 2003, Indianapolis, Indiana USA.
  43. N. Munroe, G. Nurse, S. Gallocher, G. Gonzalez, “Biocompatibility of Ni-Ti Shape Memory Alloys in Vitro”, Proceedings for Materials & Processes for Medical Devices Conference, Sept. 8-10, 2003, Anaheim, California.
  44. N. Munroe, G. Nurse, S. Gallocher and G. Gonzalez, “Repassivation Potential of Radiologically Doped Shape Memory Alloys in Vitro”, Proceedings for Materials & Processes for Medical Devices Conference, Sept. 8-10, 2003, Anaheim, California.
  45. N. Munroe, “Electrochemical Reactions associated with the Floatability of Venezuelan Auriferous Pyrite from the Processes of Cyanidation”, 5th Biennial National Conference on Mining & Quarrying, August 21-22, 2003, Guyana, South America.
  46. T. Kartikeyan, N. Munroe and S. Kanchibbolta, “Measurement of Dielectric Properties of Refractory Materials and Powdered Metals”, SMEC Conference, March 24-27, 2003, Miami, Florida.
  47. S. Kanchibbolta, N. Munroe, Y. Liu and T. Kartikeyan, “Microstructure and Phase Transformation of NiTi-Ta Shape Memory Alloys using Mechanical Alloying”, SMEC Conference, March 24-27, 2003, Miami, FL.
  48. S. Kanchibbolta, N. Munroe and T. Kartikeyan, “Synthesis and study of NiTi-Ta Alloys by Mechanical Alloying”, TMS 2003 132nd Annual Meeting & Exhibition, March 2-6, 2003; San Diego, CA.
  49. C.V. Kropas-Hughes, J.L. Blackshire, R.N. Singh, I.N. Tansel and N. Munroe, “Detection of Hidden Corrosion with X-rays”, 5th International Aircraft Corrosion Workshop Sponsored by the Naval Air Systems Command and the Office of Naval Research, Solomons, Maryland, 22-25 August 2002.
  50. N. Munroe, “Establishing Effective Partnerships” Second Annual Scholarly Technical Assistance Workshop for NASA Faculty Awards for Research (FAR) Principal Investigators and their students”, QEM Network, Albuquerque, NM Oct. 18-19, 2002.
  51. N. Munroe, G. Nurse, S. Gallocher and G. Gonzalez,  “Repassivation Potential of Radiologically Doped Shape Memory Alloys in Vitro”, NIST Advanced Technology Program/Bionucleonics 2002 Annual Meeting, Miami, Nov. 5, 2002. (poster)
  52. G. Nurse, S. Gallocher, G. Gonzalez, N. Munroe, “Biocompatibility of NI-TI Shape Memory Alloys in Vitro”, NIST Advanced Technology Program/Bionucleonics 2002 Annual Meeting, Miami, Nov. 5, 2002. (poster)
  53. N. Munroe, O. Blake, “The Environmental Sensitivity of Caribbean Economies”, Caribbean Studies Association Meeting, Nassau Bahamas, 2002.
  54. G. Irie and N.Munroe.   Poster Presentation. "Effects of Acid Concentration on The Corrosion Rate of Al-6160" July 27-30, 2000 LS CO-AMP National Research Conference 2000.
  55. X. Tan, N.D.H. Munroe, Z. Fathi and R. Garard, “Firing of Bauxite Extrudates in a Variable Frequency   Microwave Furnace”, 32nd  Microwave Power Symposium , July 14-16, 1997, Ottawa, Canada.
  56. N.D.H. Munroe, “Microstructures of Bauxite Extrudates Fired at 1450oC and 1550oC,” Second National Conference on Mining and Quarrying, Watooka House, Linden, August 29-30, 1996.
  57. N.D.H. Munroe, “Refractory Grogs for the Monolithic Industry Using Guyana Aluminosilicates”, Second National Conference on Mining and Quarrying, Watooka House, Linden, August 29-30, 1996.
  58. N.D.H. Munroe and R. Tilleux, "Rate Enhancement of Photocatalytic Cyanide Oxidation by Application of Anodic Bias/Coupled Semi-Conductor Configuration", Spectrum '96 Nuclear and Hazardous Waste Management International Meeting, Seattle, Washington, August 18-23, 1996.
  59. N.D.H. Munroe and G. Hoo, "Electrokinetic Decontamination of Concrete and Porous Media", Spectrum '96 Nuclear and Hazardous Waste Management International Meeting, Seattle, Washington, August 18-23, 1996.
  60. N.D.H. Munroe, "Sustainable Development - A Hemispheric Perspective”, Special Event at the Guyana Association of South Florida Meeting, Miami, Florida, June 2, 1996.
  61. N.D.H. Munroe, "Ground Water Contamination in Florida and its Influence on Future Supply", FIU - Water Wars Seminar, Miami, Florida, February 27, 1995.
  62. N.D.H. Munroe, "Aluminosilicate Refractory Grogs", International Congress on Metallurgy and Materials Technology, Sao Paulo, Brazil, Proceedings of the International Congress on Metallurgy and Materials Technology, 1994, Vol. 9, pp. 427 - 438.
  63. M.Z.C. Hu, R.E. Ihli, G.F. Bloomingburg, J.M. Norman, N.D.H. Munroe, R. Williams and B.D. Faison, "Biosorption and Biotransformation of Uranium by Pseudomonas Aeruginosa CSU”, Annual Meeting, Society of Industrial Microbiology, Boston, Massachusetts, July 30 - August 4, 1994. (poster)
  64. N.D.H. Munroe, J. D. Bonner, R. Williams, K. E. Pattison, J. M. Norman, and B. D. Faison, "A Binding of Dissolved Uranium by Pseudomonas Aeruginosa CSU", 15th Symposium on Biotechnology for Fuels and Chemicals, Colorado Springs, Colorado, May 10-14, 1993,.
  65. N.D.H. Munroe, "Uranyl Ion Interaction with Membranes of Pseudomonas Aeruginosa", Proceedings of the 3rd Annual WERC Technology Development Conference, April, 1993.
  66. N.D.H. Munroe, "Numerical and Experimental Simulation of Particulate Flash Reaction Systems", ASME Annual Meeting Heat Transfer in Fire and Combustion Systems, Atlanta, Georgia, 1993, ASME, HTD - Vol. 250.
  67. N.D.H. Munroe, "Air Pollution Control Technology", El-Tabbin Institute of Metallurgical Studies, Cairo, Egypt, May 16, 1992.
  68. N.D.H. Munroe and N. J. Themelis, "Effect of Process Parameters on Flash Smelting of Copper Concentrates", AIME Annual Meeting, Denver, Colorado, February 1987.
  69. N.D.H. Munroe, "A Mineral Processing Laboratory for Guyana", United Nations TOKTEN Report for the Guyana Geology and Mines Commission, United Nations Development Program, 1986.
  70. N.D.H. Munroe, “Factors Affecting the Production of Gold”, Guyana Geology and Mines Commission, Georgetown, Guyana, 1986.
  71. N.J. Themelis, J.K. Makinen, and N.D.H. Munroe, "Rate Phenomena in the Outokumpu Flash Smelting Reaction Shaft", Physical Chemistry of Extractive Metallurgy, Ed. V. Kudryk and Y.K. Rao, Conference Proceedings, AIME, 1985.

 

POSTER PRESENTATION
  1. W. Haider, N. D. Munroe, P. K. S. Gill, C. Pulletikurthi, S. Pandya, Effect of Surface Treatments on Localized Corrosion Behavior of Nitinol alloys, Society For Biomaterials, Annual Meeting and Exposition: Where Materials Meet Biology, April 21-24, 2010, Seattle, Washington
  2. W. Haider, N. Munroe, P. K. Singh Gill, V. Tek, C. Pulletikurthi, S. Pandya, A Comparison of Corrosion Resistance of Untreated and Treated Nitinol Alloys, ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE), November 13-19, 2009, Lake Buena Vista, Florida.
  3. W. Haider, N. Munroe, V. Tek, A. J. McGoron C. Pulletikurthi, P. K. Singh Gill, S. Pandya, Corrosion Resistance and Surface Analysis of Treated Nitinol Alloys, Biointerface, October 26-28, 2009, San Mateo, California.
  4. W. Haider, N. Munroe, C. Pulletikurthi, P. K. S. Gill, Corrosion Assessment of NiTi and NiTiTa, NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii.
  5. P. K. Gill, N. Munroe, S. Amruthaluri, C. Pulletikurthi, W. Haider, MWCNT Reinforced Metal Matrix Composite, TMS Annual Meeting & Exhibition, February 15-19, 2009, San Francisco, California.
  6. S. Amruthaluri, N. Munroe, P. K. Gill, C. Pulletikurthi, W. Haider, Fabrication of Highly Conductive Cu-Ag-Ni-MWCNT Composite, TMS Annual Meeting & Exhibition, February 15-19, 2009, San Francisco, California.