On-Line Training Videos:

** Note it is advisable to have a "High speed" Internet Connection to view or download these files because some do not "STREAM" **

** You must be able to view WMV, MOV and MP4 video files**

Level-1  Videos

• Introduction (3 min)
• Safety Rules (6 min)
• Dimensions, Tolerance, and the three F's (8 min)
• Shop Tour (7 min)
• Micrometer and Caliper Tutorial (9 min)
• G-code format, Cutter Compensation and Feeds and Speeds (38 min)

Level-2 Videos

• Knee mill Overview (6 min)
• Knee Mill Tool and RPM Change (13 min)
• Setting Part Origin (12 min)

Homework #1 "Anilam Mill"

• Homework #1 Instructions (3 min)
• Lecture 01: Section 01- Introduction to CNC (5 min)
• Lecture 01: Section 02- G-codes (13 min)
• Lecture 01 Section 03 - TLO (Tool Length Offsets and Cutter comp G41/G42/G40 (11 min)
• Lecture 01: Section 04 - Canned Cycles: G77 and G78 (19 min)
• Lecture 01: Section 05 - Arcs: G02 and G03 (6 min)
• Lecture 01: Section 06 - Contour programming and Homework (19 min)

Homework #2 "Business Card Holder Project"

• Homework #2 Instructions (4 min)
• Mastercam HLE Install Video  (3 min)
• Card Holder Instructional Video (24 min)
• Adding Shapes and Graphics Video (18 min)

How its Made Videos

• FIU Business Card Holder Project

Homework #3 "Fadal  Mill" Mold Project"

• Homework-3 Instructions (5min)
• Pocket, Contour, and Engraving Tutorial (20 min)
• Simple Mold Instructional (13 min)
• Multi Toolpath Mold Instructional (24 min)

Student Machine Shop Tour (OU-117)

• Student Machine Shop Tour