|
Publications
 |
Carbon
Nanotube Reinforced Aluminum Composite Coating via Cold Spraying
S. R. Bakshi, V. Singh, K. Balani, D. G. McCartney, S. Seal and Arvind Agarwal
Surf. Coat. Tech.
(in press). |
|
Deformation
Behavior of Carbon Nanotubes under High Velocity Impact
S. R. Bakshi, V. Singh, D. G. McCartney S. Seal and Arvind Agarwal
Scripta Mater. (in press) |
|
Process Map for Plasma Sprayed Aluminum Oxide- Carbon
Nanotube Nanocomposite Coatings
K. Balani and Arvind Agarwal
Surf. Coat. Tech, vol. 202 (17), pp 4270-4277, 2008 |
|
Nanomechanical Properties of Hafnium
Nitride Coating
Y. Chen, T. Laha, K. Balani and Arvind Agarwal
Scripta Mater., vol. 58(12) pp 1121-1124, 2008 |
|
Wetting of Carbon Nanotube by Aluminum Oxide
K. Balani and Arvind Agarwal
Nanotechnology, vol. 19, 2008, 165701 |
|
Analytical Model to Evaluate Interface
Characteristics of Carbon Nanotube Reinforced Aluminum Oxide Nanocomposites
Y. Chen, K. Balani and Arvind Agarwal
Appl.
Phy. Lett., vol. 92, 011916, 2008 |
|
Insitu Carbon
Nanotube Reinforcement in Plasma Sprayed Aluminum Oxide Coating
K. Balani, T. Zhang, A. Karakoti, W. Li. S. Seal and Arvind Agarwal
Acta Mater., vol.
56, 2008, pp. 571-579 |
|
Thermal Conductivity of Plasma Sprayed
Aluminum Oxide-Multiwalled Carbon Nanotubes Composites
S.R. Bakshi, K. Balani and Arvind Agarwal
J. Amer. Cer. Soc. doi:
10.1111/j.1551-2916.2007.02081.x |
|
Effect of Sintering on Thermally Sprayed Carbon Nanotube
Reinforced Aluminum Composite
T. Laha, and Arvind Agarwal
Mater. Sci. Eng. A, doi: 10.1016/j.msea.2007.07.047 |
|
Synthesis and Characterization of
Multiwalled Carbon Nanotube Reinforced Ultra High Molecular Weight Polyethylene
Composite by Electrostatic Spraying Technique
S. R. Bakshi, J. P. Tercero and Arvind Agarwal
Composites Part A: Applied Science and
Manufacturing, doi: 10.1016/j.compositesa.2007.08.004 |
|
Modified Eshelby Tensor Modeling for Elastic
Property Prediction of Carbon Nanotube Reinforced Ceramic Nanocomposites
Y.Chen, K. Balani and Arvind Agarwal
Appl. Phy.
Lett., vol. 91, 031903, 2007 |
|
Tribological
Behavior of Plasma Sprayed Carbon Nanotube Reinforced Hydroxyapatite Coating in
Physiological Solution
K. Balani, Y. Chen, S P. Harimkar, N.B. Dahotre and Arvind Agarwal
Acta Biomater., doi:10.1016/j.actbio.2007.06.001 |
|
Nanomechanical and
Nano-scratch Properties of Multiwalled Carbon Nanotube Reinforced Ultrahigh Molecular
Polyethylene Coatings
S. R. Bakshi, K. Balani, T. Laha, J. Tercero and Arvind Agarwal
JOM, vol. 7, 2007, pp.50-53 |
|
Role of Powder Treatment
and CNT Dispersion in the Fracture Toughening of Plasma-Sprayed Aluminum Oxide –
Carbon Nanotube Ceramic Nanocomposite
K. Balani, S. R. Bakshi, Y. Chen, T. Laha and Arvind Agarwal
J. Nanosci. Nanotech. Vol. 7, 2007, pp.3553,–
3562. |
|
Interfaces in Thermal Sprayed
Carbon Nanotube reinforced Aluminum Nanocomposites
T. Laha, Arvind Agarwal, S. Satya, S. Seal and W. Li
Acta Mater. vol. 55, 2007, pp.
1059-1066. |
|
Plasma-Sprayed Carbon-Nanotube Reinforced Hydroxyapatite Coating Illustrating
Biocompatible Human-Fiber-Osteoblast Growth
K. Balani, R. Anderson, T. Laha, M. Andara, J. Tercero, E. Crumpler and Arvind Agarwal
Biomaterials, vol. 28, 2007, pp.618-624 |
|
Carbon Nanotube Reinforced Aluminum
Nanocomposite via Plasma and High Velocity Oxy-Fuel Spray Forming: A Comparative
Analysis
T. Laha, Y. Liu and Arvind Agarwal
J. Nanosci. Nanotech., vol. 7, 2007, pp. 515-524 |
|
Effect of Carrier Gas
On Mechanical Properties And Fracture Behaviour Of Cold Sprayed Aluminium Coatings
S. R. Bakshi, T. Laha, K. Balani, Arvind Agarwal and J. Karthikeyan
Surface Engineering, vol. 23, No.1, (2007), pp. 18-22 |
| |
Nanoporous Hard Carbon Membranes
for Medical Applications
R. J. Narayan, C Jin, N Menegazzo, B Mizaikoff, R. A. Gerhardt, M. Andara, Arvind
Agarwal, C. Shih, C.M. Shih, S. J Lin, and Y.Y. Su
J. Nanosci. Nanotech., vol. 7, 2007 |
|
Challenges and Advances in
Nanocomposite Processing Techniques
V. Viswanathan, T. Laha, K. Balani, Arvind Agarwal, S. Seal
Materials Science And Engineering: R: Reports,
vol. 54, No. 5-6, (2006), pp 121-285 |
|
Hemocompatibility of diamond like carbon–metal composite thin films
M. Andara, Arvind Agarwal, D. Scholvin, R.A. Gerhardt, A. Doraiswamy, C. Jin, R. J.
Narayan, Chun-Che Shih, Chun-Ming Shih, Shing-Jong Lin and Yea-Yang Su
Diamond and
Related Materials, volume 15, Issues 11-12, 2006, pp. 1941-1948 |
|
Microstructural and Biological Properties of Nanocrystalline Diamond Coatings
R.J. Narayan, W. Wei, C. Jin, M. Andara, Arvind Agarwal, R.A. Gerhardt, Chun-Che Shih, Chun-Ming Shih, Shing-Jong Lin, Yea-Yang Su,S. Mamedov, P. Boolchand, R. Ramamurti, V. Shanov and R. N. Singh,
Diamond and Related Materials, in press, September 2006. |
|
Synthesis, Microstructural Characterization and Mechanical Property Evaluation of Vacuum Plasma Sprayed Tantalum Carbide
Kantesh Balani, Gabriela Gonzalez, Arvind Agarwal, Robert Hickman and Scott O’Dell,
J. Amer. Ceram. Soc., Vol. 89(4), 2006, pp.1419-1425. |
|
Near Net Shape Fabrication Via Vacuum Plasma Spray Forming
K. Balani, Arvind Agarwal and T. McKechnie,
Trans. Indian Institute Metals, Vol. 59 (2), 2006, pp. 237-244. |
|
Molecular Modeling of Metastable FeB49 Phase Evolution in Laser Surface Engineered Coating
Kantesh Balani, Arvind Agarwal and Narendra B. Dahotre,
J. Appl. Phys. 99, 2006, 044904. |
|
High Energy Density Processing of a Free Form Nickel–Alumina Nanocomposite
V. Viswanathan, Arvind Agarwal, V. Ocelik, J. T. M. De Hosson,N. Sobczak, and S. Seal
J. Nanosci. and Nanotech., Vol. 6 (3), 2006, pp.651–660. |
|
Synthesis of Bulk Nanostructured Aluminum Alloy Component through Vacuum Plasma Spray Technique
T. Laha, Arvind Agarwal, T. McKechnie, K. Rea and S. Seal,
Acta Mater., vol. 53, 2005, pp. 5429-5438. |
|
Transmission Electron Microscopy of Cold Sprayed 1100 Al Coating
K.Balani, Arvind Agarwal, J. Karthiekyan, and S. Seal,
Scripta Mater, vol. 53, 2005, pp. 845-850. |
|
A Comparative Study to Estimate Effective Elastic Modulus of Laser-Engineered Composite Boride Coating
Tapas Laha, Arvind Agarwal and Narendra Dahotre,
Advanced Engineering Materials, vol.7, 2005, pp.626-629. |
|
FIB Cross-Sectioning of a Single Rapidly Solidified Hypereutectic Al-Si Powder Particle for HRTEM
K. E. Rea, Arvind Agarwal, T. McKechnie and S. Seal,
Microscopy Research and Technique, vol. 66, 2005, pp. 10-16. |
|
Effect of Carrier Gases on Microstructural and Electrochemical Behavior of Cold-Sprayed 1100 Aluminum Coating
Tapas Laha, Kantesh Balani, Arvind Agarwal, J. Karthikeyan and N. Munroe,
Surface Coatings and Technology, Vol. 195/2-3, 2005. pp 272-279 |
|
Synthesis of Nanostructured Spherical Aluminum Oxide Powders by Plasma Engineering
Tapas laha, Kantesh Balani, Arvind Agarwal and Sudipta Seal,
Materials and Metallurgical Transactions A, vol. 36 A (2), 2005, pp.301-309. |
|
Synthesis and Characterization of Plasma Spray Formed Carbon Nanotube reinforced Aluminium Composite
Tapas Laha, Arvind Agarwal, Tim McKechnie and Sudipta Seal,
Materials Science and Engineering A, vol. 381, 2004, pp. 249-258. |
|
Making of Nanocomposite Parts: Present Status and Future Challenges
S. Seal, S. C. Kuiry, P. Georgieva, and Arvind Agarwal,
MRS Bulletin, Jan 2004, pp.16-21. |
|
HVOF Deposited Nanostructured Aluminum
T. Laha, Arvind Agarwal and T.McKechnie,
JOM, January 2004, Vol. 55(1), pp.54. |
Papers earlier than 2002 can be found in CV
. |
