Papers Published in Books:

“Monitoring Single Force Versus Resultant Force When a Genetic Tool Monitor is Used”
I.N.Tansel, W.Y.Bao, D.Rincon, C.V.Kropas-Hughes, presented at the ANNIE’2003, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.13, pp.823-828, edited by C.H.Dagli, et al, ASME Press, New York, 2003.

“Genetic Algorithm versus Neural Network in Health Monitoring Applications”
I.Tansel, W.Bao, N.Reen, T.Arken and C.V.Korpas-Hughes, presented at the ANNIE’2002, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.12, pp.839-844, edited by C.H.Dagli, et al, ASME Press, New York, 2002.

“Detection of Partial Tool Damage by Using Genetic Algorithm Based Tool Monitoring System”
L.Li, W.Y.Bao, I.N.Tancel, C.V.Kropas-Hughes, presented at ANNIE’2001 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.11, pp.203-208, edited by C.H.Dagli, et al, ASME Press, New York, 2001.

“Design of Bio-oxidation Facilities by Genetically Optimized Neural Networks”
B.Tansel, I.N.Tansel, S.Y.Yang, W.Y.Bao, V.Girivasan and A.Sasirathsiri, presented at ANNIE’2000 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.10, pp.285-290, edited by C.H.Dagli, et al, ASME Press, New York, 2000.

“A Nutrition Intervention Tool (NIT) Using Neural Networks and Genetic Algorithm”
IN.Tansel, S.Y.Yang, F.G.Huffman, C.Shu, W.Y.Bao, V.Girivasan, A.Sasirathsiri and B.Tansel, presented at ANNIE’2000 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.10, pp.819-824, edited by C.H.Dagli, et al, ASME Press, New York, 2000.

“Automated Manufacturing Time and Cost Estimation of Composite Parts Using Neural Networks”
V.Girivasan, S.Y.Yang, IN.Tansel, A.Sasirathsiri, W.Y.Bao, and C.V.Kropas-Hughes, presented at ANNIE’2000 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.10, pp.989-994, edited by C.H.Dagli, et al, ASME Press, New York, 2000.

“Tool Wear Monitoring in Micro-End-Milling Operations by Using Genetic Algorithms”
I.N.Tansel, W.Y.Bao, N.Mahendrakar, S.Y.Yang, B.Shisler, D.Smith and J.Murray, presented at the ANNIE’99 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.9, pp.1107-1112, edited by C.H.Dagli, et al, ASME Press, New York, 1999.

“Modeling of Fouling Characteristics of Ultrafiltration Membranes Using Genetic Algorithms”
B.Tansel, W.Y.Bao and I.N.Tansel, presented at the ANNIE’99 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.9, pp.1207-1212, edited by C.H.Dagli, et al, ASME Press, New York, 1999.

“Modeling Time Series Data by Using Neural Networks and Genetic Algorithms”
I.N.Tansel, S.Y.Yang, G.Venkataraman, A.Sasirathsiri, W.Y.Bao, N.Mahendrakar, presented at the ANNIE’99 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.9, pp.1055-1060, edited by C.H.Dagli, et al, ASME Press, New York, 1999.

“Introduction to Genetically Optimized Neural Network Systems (GONNS)”
I.N.Tansel, S.Y.Yang, C.Shu, W.Y.Bao, N.Mahendrakar, B.Tansel and G.Huffman, presented at the ANNIE’99 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.9, pp.331-336, edited by C.H.Dagli, et al, ASME Press, New York, 1999.

“Identification of Cutting Conditions by Using an Analytical Model and Genetic Algorithms for Micro-End-Milling Operations”
I.N.Tansel, W.Y.Bao, B.Tansel, B.Shisler, D.Smith and J.Murray, presented at ANNIE’98 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.8, pp.779-784, edited by C.H.Dagli, et al, ASME Press, New York, 1998.

“Wear Estimation in Micro-End Milling with Wavelet Transformations and Probabilistic Neural Networks”
I.N.Tansel, W.Y.Bao, T.T.Arkan and B.Shisler, presented at ANNIE’98 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.8, pp.755-760, edited by C.H.Dagli, et al, ASME Press, New York, 1998.

“Neural Network Based Performance Estimator for High Energy Electron Beam Irradiation Process”
B.Tansel, I.N.Tansel and W.Y.Bao, presented at ANNIE’98 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.8, pp.839-844, edited by C.H.Dagli, et al, ASME Press, New York, 1998.

“Neural Network Based Cutting Force Estimators for Micro-End-Milling Operations”
I.N.Tansel, W.Y.Bao, T.T.Arkan, B.Shisler, M.McCool and D.Smith, presented at ANNIE’97 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.7, pp.885-890, edited by C.H.Dagli, et al, ASME Press, New York, 1997.

“Wear Estimation for Micro-Machining of Non-Metal Materials”
I.N.Tansel, W.Y.Bao, T.T.Arkan, B.Shisler, M.McCool, A.Jinks and D.Smith, presented at ANNIE’97 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.7, pp.903-908, edited by C.H.Dagli, et al, ASME Press, New York, 1997.

“Visualization of Underground Contamination by Using Neural Networks”
I.N.Tansel, W.Y.Bao, T.T.Arkanand B.Tansel, presented at ANNIE’97 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.7, pp.1007-1012, edited by C.H.Dagli, et al, ASME Press, New York, 1997.

“Modeling Contamination Sites with Trainable Networks”
I.N.Tansel, W.Y.Bao, B.Tansel, C.M.Jordahl, presented at ANNIE’95 Conference, published in the book of "Intelligent Engineering Systems Through Artificial Neural Networks" Vol.5, pp.823-828, edited by C.H.Dagli, et al, ASME Press, New York, 1995.